ENHANCED ADHESIVE SYNTHETIC PAPER 44 X 147 ROLL
Features
- Get non-glare images with matte paper
- The matte finish gives lesser glare and gloss but high-quality image results
Tech Specs
| Basic |
| Product Type |
Matte Paper |
| Packaged Quantity |
1 / Roll |
| Brightness |
97 |
| Brand Name |
Epson |
| Sheet Size |
44″ x 100 ft |
| Sheet Thickness |
5 mil |
| Surface Finish |
Matte |
| Grammage |
135 g/m² |
| General Information |
| Product Type |
Matte Paper |
| Manufacturer Part Number |
S041619 |
| Manufacturer Website Address |
http://www.epson.com |
| Packaged Quantity |
1 / Roll |
| Manufacturer |
Epson Corporation |
| Product Name |
Matte Papers |
| Brand Name |
Epson |
| Miscellaneous |
| Additional Information |
- Indoor/outdoor usage:
– Performance: Recommended for both
– Additional Comments: UV lamination is recommended for outdoor usage.
- Resistance to water:
– Performance: Good
– Additional Comments: Bleeding does not occur with incidental water contact. However, surface lamination is recommended in wet conditions to protect the outer coating. The base is waterproof.
- Ink drying time:
– Performance: Immediate (less than 30 seconds)
– Additional Comments: Ink is dry to the touch after printing. However, it takes 24 hours before it cures and becomes durable.
- Lamination feasibility:
– Performance: Pressure sensitive; cold lamination only.
– Additional Comments: A vinyl-based film that contains a UV absorbent is recommended for lamination purposes. For anti-graffiti purposes, use a fluoridebased film (i.e. Tedlar). For use in direct sunlight, avoid polyester or polycarbonate film.
- Surface adhesion:
– Performance: Flat surfaces only
– Additional Comments: For best results, apply the adhesive to a clean, flat surface.Test it before applying it to the final print. Stretching the adhesive is not recommended, as the paper may shrink over time.
- Adhesive backing:
– Performance: Re-positionable
– Additional Comments: Removable adhesive back provides enough strength and durability for outdoor usage. However, strength will decrease with increased re-positioning.
NOTE:
- Actual print stability and longevity will vary according to image, display conditions, light intensity, humidity, atmospheric conditions, and post-printing treatments. Epson does not guarantee stability or longevity. For maximum print life, display all prints under glass or lamination or properly store them.
|
| Physical Characteristics |
| Product Material |
Polypropylene |
| Product Information |
| Brightness |
97 |
| Opacity Percentage |
91% |
| Sheet Thickness |
5 mil |
| Surface Finish |
Matte |
| Grammage |
135 g/m² |
